Detailed Description
This listing is for a Cablesight-certified, fully tested Cisco uBR10012 system (fully changeable as per your needs):
Qty |
Part Number |
Description / Notes |
1x |
UBR10012 |
CMTS Chassis (8 RF card + 4 WAN + 2 Timing Card + 2 PRE slots, Fan Slot) |
1x |
UBR10-FAN-ASSY |
Fan Assembly for the UBR10012 |
1x |
UBR10-CHAS-COVER |
Front cover for UBR10012 CMTS Chassis |
2x |
UBR10-PWR-DC |
uBR10012 DC Power Supply, 2400W or 3000W maximum power consumption |
1x |
ESR-PRE4 |
10000 Series Performance Routing Engine 4 |
1x |
UBR10-DTCC REV 02 |
DOCSIS Timing, Communication, and Control Card + DTI Client, Upgraded to Rev 02 |
1x |
MC-20X20V-20D |
MC-20X20V-20D DOCSIS 3.0 Broadband Processing Engine w/ 20 DS x 20 US LICENSES |
1x |
CAB-RFSW520QTIMF2
|
Cable bundle MC-20X20V Card (25 McX in 3x UCH-2 to 25 RF connectors) |
1x |
HH-CARRIER |
Carrier for HH-1GE Modules
|
1x |
HH-1GE |
1-Port One Gigabit Ethernet Shared Port Adapter |
1x
|
Free Console Cable |
Cisco Console Cable (blue) |
5x |
Free D3.0 Modems |
Technicolor TC4310 D3.0 16x4 Data Modem, New |
4x |
Free Support Hours
|
Engineering Technical Support / Assisstance with Setup and Troubleshooting |
1x |
Free RF Splitters
|
2x Cisco 8 Way Splitters, 10x BGI 2-Way Splitters, 10x BGI 3-Way Splitters, 10x BGI 4-Way Splitters |
CMTS Specifications and Capacity for Above Configuration
CMTS: 20 Downstream Channels (Bandwidth Capacity 800 Mbps) x 20 Upstream Channels
Channel Bonding Supported: 4, 8 and 16 (24 and 32-channel bonding require PRE5 / 3GX60V and TC1000)
Purchaser may pick up palletized order from our shipping dock or we can ship worldwide (please contact us for shipping options). All equipment comes with a standard one-year warranty. Additional options available upon request. The above configuration can be modified to fit your needs. Please contact us to quote any changes you wish to make.
Engineering Support and Other Services
Four hours of engineering support are included and additional engineering support may be purchased to assist with set up or troubleshooting problems - remotely or onsite. We can also assist with new construction system design or a rebuild of an existing system. Additionally, we license the DOXcontrol provisioning and RF management system and can help with the networking design and creation of modem configuration profiles.
|
Our Testing Procedures
We test each CMTS system extensively in our DOCSIS test labs. This includes running the system in a live environment with cable modems and CPE devices capable of surfing the outside Internet:
|
PHYSICAL INSPECTION & REAL WORLD DIAGNOSTIC TESTING:
- Each component board is visually inspected carefully
- Any needed repairs are performed prior to system testing in the lab
- We check each port and measure signal levels and signal quality
- We check downstream, upstream, SNR levels plus MER/BER & Constellations
- We connect cable modems and test throughput and connectivity on a live system
- We verify channel bonding capabilities and DS and US SNR and Power Levels
- We check all Ethernet, SFP / XFP and other peripherals
- We check the power supplies and ensure they meet the manufacturer's specs
- We can optionally leave our lab configuration on the unit and assign your preferred downstream and upstream frequencies - saving you time
- Once the unit is 100% passing, we carefully package the order for shipping
|
|
|
|
|
|