Cisco D3.0 UBR10012 2x PRE4, 2x DTCC, 2x AC CMTS, 3GX60V, TC1000, RFGW-1, 72x47

(No reviews yet) Write a Review


Item specifics

Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.


DOCSIS Standard: DOCSIS 3.0 Model:




Type: CMTS

Does not apply


This listing is for a Cisco uBR10012 (uBR10K) CMTS, which is complete and ready to deploy!  We can also assist with the software configuration and setup if that service is needed.

We can modify the configuration to meet your needs as there are literally hundreds of hardware configurations possible . The unit is powered with 2 AC PSU units. The full configuration is as follows:

Cisco D3.0 UBR10012 Chassis with Fan Tray, 2x PRE4, 1x MC-3GX60V, 2x DTCC, 1x SIP-600, SPA- 5x1GE-V2, 2x AC PSU. Also included are these external pieces needed for the M-CMTS configuration - one Time Creator 1000 and one RFGW-1-D with 1 DC PSU and 5 QAM cards (80 channels).

This high density configuration has 3-4 times the useable channels of a 20X20V-20D card. Please compare below:

MC-20x20V-20D can produce just two 8x4 bonding groups.

MC-3GX60V (60x40) can produce an amazing seven 8x4 bonding groups, 3.5 times more from a single RF card!

We can assist with onsite or remote engineering and also help you upgrade from the older MC-20X20V cards to the far superior (and lower cost) MC-3GX60V cards.

These units also come with a 90 day warranty.  Note:  Picture is a stock photo and the unit has only what is described above. 




18 rack units with two chassis per 7-foot rack; fully configured chassis weight is 235 lb (106.6 kg); each chassis is 31.25 in. (79.4 cm) high, 17.2 in. (43.7 cm) wide, and 22.75 in. (57.8 cm) deep


DC input voltage of -48 to -60 VDC with 3000W maximum power consumption, 230 VAC option with 2400W maximum power consumption

Additional Powering Options:

• DC input voltage of -40.5 to -72 VDC with 3300W maximum power consumption

• 230 VAC, 3300W maximum power consumption


41 to 104°F (5 to 40°C) operating and -40 to 158°F (-40 to 70°C) non-operating


Eight line card slots; four LAN/WAN interface slots; interfaces include Gigabit Ethernet and Wideband SPA

Compliance and emissions

UL/CSA 60950-1, IEC/EN 60950-1, AS/NZS 60950.1, CAN/CSA 22.2 No. 950-95, EN 300 386


FCC 47CFR15, Class B, CISPR22 Class B, EN55022 Class B, AS/NZS CISPR 22 Class B, ICES-003 Class B, VCCI Class B, IEC/EN61000-3-2, IEC/EN61000-3-3, IEC/EN61000-4-2, IEC/EN61000-4-3, IEC/EN61000-4-4, IEC/EN61000-4-5, IEC/EN61000-4-6, IEC/EN61000-4-11, designed to meet GR-1089-CORE NEBS EMC and Safety, Issue#5, GR-63-CORE NEBS Physical Protection, Issue#3.

Software support

Cisco IOS Software Release 12.3(13)BC minimum to support PCMM, admission control, Advanced Mode DSG, and SII


• This unit will be shipped via freight. We are happy to make freight arrangements through CH Robinson on behalf of the buyer. If the buyer would like to make their own arrangements, they are welcome to do so. Please contact us for more information concerning freight shipping. Thanks! 

• We ship quickly from the Midwest, usually on the same day we receive your paid order. We process orders until 1:00 pm EST (Mon-Fri)

• Please contact us for shipping quotes to international locations.


View AllClose